Hook Stick Tools For High Voltage

Hook Stick Tools for High voltage Admin Edit

Min. Order: 100 Piece/Pieces
Payment Terms: L/C, T/T
Place of Origin: Zhejiang, China (Mainland)
Production Capacity: 10000pieces/month
Packing: cartons
Delivery Date: 10days
Brand Name: Sasun
material: aluminium voltage: high
Specifications
Hook Stick Tools for High voltage
Hook Stick Tools for High voltage
Used for high voltage
More than 20 years' experience of export
Hook Stick is first attached to a universal pole at least six feet long. It is then positioned across the front of the Type FSC Cutout, with the Hook Stick anchor hung on the attachment hook on the far side of the cutout. The pull ring of the fuse tube or disconnect blade is engaged with Hook Stick's pull-ring hook and held fast with Hook Stick's pull-ring of the fuse tube or disconnect blade is engaged with Hook Stick's pull-ring hook and held fast Hook Stick's pull-ring lacth. As the universal pole is pulled downward with a firm, steady stroke, and as Hook Stick is extended to its maximum length, the cutout is opened and the current si diverted through Hook Stick - at the same time Hook Stick's opening stroke, its internal trigger trips, the charged operating spring is released, the internal contact are separated,and the circuit is positively interrupted. The only sound is that of Hook Stick tripping.
Circuit interrupting is independent of the speed at which the Hook Stick tool is operated. All that is required is a smooth operating stroke without hesitation, wihtout jerking, until released to reset Hook Stick for its next operation.
And resetting Hook Stick is easy too merely release the resetting latch and firmly close the extended tool to its fully telescoped position,it's that simple.For detailed information on Hook Stick, FRT'S portable load break tppl, see FRT Descriptive Bulletin 811-30.
1.Attach
    Reach across the front of the cutout and attach Hook Stick's anchor to the attachment hook on the far side of the cutout and then engage its pull ring with Hook Stick's pull-ring hook.
    Hook Stick's pull-ring latch prevents disengagement of the cutout pull ring and Hook Stick's pulling hook.
2.Pull
   A firm, steady downward pull on Hook Stick's - to its maximum extended length-opens the cutout in the normal manner as the current is diverted through Hook Stick. At a prederermined point in the opening stroke, Hook Stick trips, beraking the circuit positively.
3.Remove
   Hook Stick is disengaged by first removing its anchor from the cutout attachment hook. Then, with the blade in the open position,Hook Stick is removed from the pulling with a simple "roll-off" motion.

Related Products

PRODUCT DETAIL ANSI 57 series Post porcelain insulator

ANSI 57 series Post porcelain insulator

SG74
PRODUCT DETAIL ANSI Post porcelain insulator

ANSI Post porcelain insulator

57-1
PRODUCT DETAIL ANSI 54 series Strain porcelain insulator

ANSI 54 series Strain porcelain insulator

54-4
PRODUCT DETAIL ANSI Strain porcelain insulator

ANSI Strain porcelain insulator

ED-2B
PRODUCT DETAIL 70KN Suspension porcelain insulator

70KN Suspension porcelain insulator

52-1
PRODUCT DETAIL Porcelain Pin Type Insulator

Porcelain Pin Type Insulator

SH48
PRODUCT DETAIL ANSI 55 series Pin porcelain insulator

ANSI 55 series Pin porcelain insulator

ANSI
PRODUCT DETAIL NLD type strain clamp

NLD type strain clamp

NLD

Category: others

0